Welcome to CompressorPros.com.
Shop by Brand
80 CFM
Start by adding up the airflow your work requires, then use this 80 CFM air compressor category to filter by that target. This is an airflow-based shopping filter, so the main check is confirming that a compressor's delivered CFM meets your total demand at the working PSI your tools or processes actually need.
Checking Air Demand At 80 CFM
Total the air each tool or process draws when running at the same time, then compare that figure against a compressor's rated 80 CFM delivery at ythe working PSI. Allow a reasonable operating buffer above your total so recovery keeps pace with steady use, and factor in compressor type: a two-stage piston would need to produce anywhere from 25 to 40% more than the required CFM to allow for duty cycle, as no piston air compressor is rated for 100% duty. A rotary screw can be sized closer to the required demand because it runs at 100% duty. If your verified demand lands below this level, the 70 CFM air compressors category may fit, while demand that sits close is worth weighing against the 90 CFM air compressors for added margin.
Matching 80 CFM To Working Pressure
A 80 CFM rating only means something once you know the pressure it was measured at, because the same compressor delivers less air as the pressure increases. Check each product page for the PSI at which airflow is stated, then compare that against the pressure your tools or processes actually operate. If a listing quotes airflow at a lower pressure than you need, its usable delivery at your working PSI will be less than the headline figure suggests.
FAQ:
Should I compare 80 CFM with the lower or higher linked category?
Compare the 70 CFM air compressors if your totaled demand is lower and verified, or the 90 CFM air compressors if you want additional airflow headroom for sustained or simultaneous use.
What else should I check alongside a 80 CFM rating?
Confirm the working PSI the airflow is rated at, and review the other listed specifications on each product page rather than treating the CFM figure alone as a match.
If you have questions, please reach out to us at info@compressorpros.com or Call 803-339-0445