Welcome to CompressorPros.com.
Shop by Brand
350 CFM
Begin by totaling the airflow your work draws, then use this 350 CFM air compressor category to filter against that number. This is an airflow-based shopping filter, so the main point is confirming that a compressor's delivered CFM meets your combined demand at the working PSI your tools or processes actually run.
Checking Air Demand At 350 CFM
Add up the air every tool or process pulls when operating at the same time, then measure that combined figure against a compressor's rated 350 CFM delivery at your working PSI. A rated airflow number only helps once you know the pressure at which it was measured, since the same unit delivers less air as the required pressure climbs. Leave a reasonable operating buffer above your total so recovery keeps up with steady use, and remember that hose length, fittings, filters, regulators, and piping can each cost pressure between the compressor and the point of use.
Matching 350 CFM To Intermittent And Sustained Demand
The application shapes what 350 CFM can cover. Intermittent work pulls air in bursts, while sustained tools, production processes, and simultaneous users keep demand steady and leave less room to spare. At this airflow level the compressor will typically be a rotary screw, which runs at 100% duty and can be sized closer to the required demand. That still leaves the working PSI as the qualifier, so confirm the pressure at which the delivery figure is rated before you commit to a unit.
When To Compare 350 CFM With A Nearby Tier
If your verified demand lands below this figure, the 300 CFM air compressors tier may fit a lighter load, while demand that sits close or runs steady is worth weighing against the 375 CFM air compressors for added margin. A higher airflow number is not automatically the better choice, only a different delivery target, so let your totaled demand at working PSI settle the direction.
FAQ:
How much airflow headroom should I allow above my calculated figure?
Allow a reasonable operating buffer above your totaled demand so recovery keeps pace with steady use, and size that margin to how continuously your tools or process draw air.
Is 350 CFM enough for my air demand?
It depends on your totaled simultaneous demand measured at your working PSI plus a reasonable operating buffer, and on how continuously your tools or process draw air.
Should I compare 350 CFM with the lower or higher linked category?
Look at the 300 CFM air compressors if your totaled demand is lower and verified, or the 375 CFM air compressors if you want extra airflow headroom for sustained or simultaneous use.
If you have questions, please reach out to us at info@compressorpros.com or Call 803-339-0445