Welcome to CompressorPros.com.
Shop by Brand
Portable Vertical Compressor Units on Wheels
Vertical portable air compressors with wheels use a vertical tank and wheel base that is smaller and will take up less floor space than a horizontal unit.. CompressorPros carries vertical wheeled portables 1-2 HP (115V). Standard shipping is free.
What Portable Vertical Compressors on Wheels?
A verticalportable air compressor with wheels mounts the motor, pump, on a vertical tank with wheels, allowing one person to roll the unit between work areas. The vertical tank takes up less floor space. They serve garages, auto repair bays, woodworking studios, and contractor operations where the compressor moves regularly between work stations.
115V Electric Vertical Portables
115V models plug into a standard household outlet, making them the most convenient option for home garages and small shops. HP is limited to about 1.5-2 HP on a standard 15-20 amp circuit, delivering 4-8 CFM for brad nailers, finish nailers, inflation, and light pneumatic tools. The C-Aire P016V030-1115 is a top-selling horizontal portable on the site.
Standard Control Vertical Portables
Standard models use a pressure switch to cycle the motor on and off based on tank pressure. The motor starts when pressure drops below the cut-in point and stops when it reaches the cut-out point. This is the simplest and most common control type, well-suited to intermittent tool use. This is Start-Stop Pressure Switch control.
Key Specifications
- CFM (Cubic Feet per Minute): Vertical wheeled portables deliver roughly 5-7 CFM depending on HP. A brad nailer draws 1-2 CFM; a framing nailer draws 4-6 CFM; an impact wrench draws 4-8 CFM. Add up simultaneous tool demands and include a 25-30% buffer.
- HP (Horsepower): Electric models available 1.5-2 HP.
- Tank Capacity (Gallons): Up to 30 gallon tanks is standard.
- Max PSI (Pounds per Square Inch): Most electric models deliver 125-135 PSI.
- Voltage (Electric Models): 115V for units up to 2 HP (standard outlet).
CompressorPros buys direct from the manufacturer, saving time and money.
FAQ
Why choose vertical over horizontal for a portable compressor on wheels? Vertical units on wheels take up less floor space when standing upright but are taller and less stable during movement.
What is the most common mistake when buying a horizontal portable compressor? Not realizing that you are limited to 115 volt and therefore, only up to about 7 CFM.
Can a vertical portable compressor handle spray painting? The short answer is No. Most spray applications are going to require 15-20 CFM.
Does CompressorPros offer free shipping on vertical portable compressors? Yes. Standard shipping is free, direct from the manufacturer, on every unit in this category.
Shop Vertical Units with Wheels at CompressorPros
CompressorPros carries horizontal portable air compressors with wheels from 1.5 to 2 HP in electric, 115 Volt. For rough-terrain job sites, see wheelbarrow air compressors. For lighter-duty needs, hand-carry air compressors weigh under 80 pounds. Standard shipping is free, direct from the manufacturer.
If you need help choosing a vertical portable compressor for your shop or site, call (803) 339-0445 or email info@compressorpros.com.