60 CFM Air Compressors for Sale

60 CFM air compressors serve shops with heavier production demand than a smaller compressor can support. This category helps you pair usable air delivery with multiple stations running through the workday, and its ratings are best compared at the working pressure your equipment actually needs so the compressor keeps up under combined load.

Compare Selected

What 60 CFM Supports In A Shop

A 60 cfm air compressor delivers airflow for shops where combined tool demand has moved past what a 50 CFM system comfortably handles. Because a CFM rating is only meaningful at a stated pressure, compare the delivered CFM against the working PSI your equipment actually requires. Buyers at this level are typically sizing for a large automotive, body shop or industrial production line.

Matching 60 CFM To Combined Demand

This airflow level fits busy production floors where several stations draw air at the same time and higher demand equipment runs for long stretches. Grinders, sanders, and abrasive blasting gear pull air steadily, and total demand climbs with each station added to the line. If your shop is adding capacity or already operating near its ceiling, a larger compressor would be required.

Specs To Check Before Choosing 60 CFM

Delivered CFM at the working PSI your tools require, since airflow ratings depend on pressure.
The combined air demand of every tool or process you plan to run.
Duty cycle, since some compressor designs are not rated to run without interruption and need recovery time between cycles. Size with margin above your measured demand rather than matching it exactly, and check the duty cycle rating of the compressor you are considering.
Whether use is intermittent or sustained, since steady demand raises airflow needs.
The number of tools or users drawing air at the same time.
Tank size, which affects reserve air and how often the compressor cycles.

Compare CFM Options

If your combined demand is lower, 50 CFM air compressors may cover the workload. For larger systems or shops planning to grow, compare 70 CFM air compressors or 90 CFM air compressors and possibly larger compressors before deciding. Choosing among these tiers comes down to how much air your tools need at their working pressure and how many run at the same time.

Frequently Asked Questions

What can a 60 CFM air compressor run?
It suits shops running multiple stations together, including high-draw equipment used for long stretches. Check each tool's air requirement at its working pressure before deciding.

Should I choose 50 CFM or 60 CFM?
Choose 50 CFM when your measured combined demand fits within its delivered airflow with the appropriate buffer. Move to 60 CFM when demand runs closer to that ceiling, more stations share the line, or you expect to add capacity.

How do I know if 60 CFM is enough?
Add up the CFM each tool requires at your working PSI, then account for how many run at once. Leave margin above that total rather than matching it exactly, since duty cycle limits mean a compressor sized to your peak demand may not keep up or overheat.

Shop 60 CFM Air Compressors At CompressorPros

CompressorPros carries 60 cfm air compressors for shops with heavier production air needs. Browse all airflow-based categories through Shop by CFM. All orders ship free, direct from the manufacturer.

Shop by Category

Shop by Brand

Shop by Brand

60 CFM

EMAX EP07DW120V1 15 HP (2 x 7.5) 230 Volt Single Phase Silent Air Duplex Air Compressor - TEFC Motors and NEMA 4 Enclosures

Schulz 15120HW60X-3 15 HP 208-230 Volt 3 Phase 60 CFM 120 Gallon Air Compressor

Chicago Pneumatic QRSM 20 TMD-3 20 HP Tank Mount Rotary Screw Air Compressor w/Dryer 150 psi

Chicago Pneumatic QRSM 20 TMD-3 20 HP Tank Mount Rotary Screw Air Compressor with Dryer

EMAX Silent Air ESP07D120V1 15 HP (2 x 7.5) 230 Volt Single Phase Silent Air Duplex Air Compressor

ABAC AS-20253TM 20 HP Rotary Screw Air Compressor

ABAC AS-20253TMD 20 HP Rotary Screw with Dryer

AMICO IE-RSL-15-463-FS 15 HP 3 Phase Base Mount Rotary Screw Air Compressor

Chicago Pneumatic QRSM 20 TM-3 20 HP Rotary 125 psi

Chicago Pneumatic QRSM 20 TM-3 20 HP Rotary Screw Compressor

Elgi EG11-125 15HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 125 psi

Elgi EN15-150-120T-A2 20 HP 208/230/460 Volt Three Phase Rotary Screw Air Compressor Compressor 120 Gallon Horizontal Tank Mount - 150 psi