Shop for Compressed Air Dryers 0

CompressorPros carries compressed air dryers rated for 0 to 15 CFM, sized for small shop compressors, point-of-use drops, and light single-tool setups. This category serves hobbyists, small shops, and technicians keeping moisture out of a modest air line. Browse compact refrigerated models on standard 115 volt power, all shipping free, direct from the manufacturer.

Compare Selected

What Are 0 to 15 CFM Compressed Air Dryers?

A 0 to 15 CFM air dryer removes moisture from compressed air at the flow rates of small reciprocating compressors, single workstations, and point-of-use drops. Even a small compressor pushes water vapor into the air line, and as that air cools it condenses into droplets that may rust fittings, spot paint finishes, and shorten the life of air tools. At this capacity, a dryer is an affordable way to protect one machine or one process rather than a whole plant. The category is built around compact refrigerated units like the Schulz ADS-10 10 CFM Refrigerated Air Dryer and the COOL 15 15 CFM Refrigerated Air Dryer.

Why a Small Shop Needs a Dryer

It is easy to assume a compressor this size does not produce enough moisture to matter, but the problems it causes are the same as on a large system, just at a smaller scale.

Whatever the application, if you compress air and there is any moisture in the air, it will go through the system and come out as water.

Refrigerated Drying at This Capacity

Every unit in this range is a refrigerated dryer, which chills the air so moisture condenses out and drains away, delivering a pressure dew point around 35 to 50 degrees F. That covers general shop air, tools, and most finishing work.

For applications needing a dew point below freezing, such as air lines running through unheated space or instrument air, a regenerative desiccant dryer is required. Those are not offered at this small a capacity, so if your work demands very dry air, compare the higher-capacity Dryers and Compressed Air Treatment range where desiccant options begin.

Types of 0 to 15 CFM Air Dryers

Non-Cycling Refrigerated Dryers

Non-cycling dryers run the refrigeration circuit continuously, delivering a steady dew point with simple, dependable operation. They suit small shops where the compressor runs intermittently through the day. The COOL 15 is rated to a 95 degree F maximum inlet temperature, and the Schulz ADS-15 UP covers the top of this range.

Compact Point-of-Use Dryers

Smaller units drop in near a single workstation or machine, drying the air just before it reaches a moisture-sensitive tool. The Schulz ADS-10 suits a light single-tool setup, and the KSI Ecotroc KTA-S14 offers a compact 14 CFM option.

Single Phase 115 Volt Units

Dryers in this range typically run on standard household power, which keeps them practical for a garage or small shop without special wiring. The C-Aire AC KRAD-15 runs on single phase 115 volt service, plugging into a standard outlet.

Key Specifications To Compare

Rated CFM capacity: Must meet or exceed your compressor's actual output. Undersizing lets moisture pass untreated.
Maximum inlet temperature: Commonly 95 or 100 degrees F. Air hotter than the rating reduces capacity, which matters if the dryer sits near the discharge.
Pressure dew point: These refrigerated units deliver roughly 35 to 50 degrees F, suitable for tools and general finishing.
Voltage: Nearly all run on single phase 115 volt power in this range, so a standard outlet works.
Pressure drop: Every dryer costs some system pressure. On a small system, factor it into your working PSI at the tool.
Footprint: Compact size is part of the appeal. Check dimensions for a bench or wall location near the machine.

Because dryer capacity is rated at specific inlet conditions, match your compressor's actual CFM output to the dryer's rating rather than sizing by horsepower or tank gallons.

Frequently Asked Questions

Do I really need an air dryer for a small compressor?
A small compressor still pushes water into the line, and the resulting rust and finish defects are the same problems large systems face.

What size dryer do I need?
Match the dryer's rated capacity to your compressor's actual CFM output, with a little margin. Sizing to the compressor's nameplate CFM is the usual starting point at this scale.

Will one of these dryers run on a standard outlet?
Most 0 to 15 CFM dryers run on single phase 115 volt power and plug into a standard outlet, which is part of what makes them practical for a home shop or garage. Confirm the voltage on the product page before ordering.

Can I put the dryer right at the compressor?
You can, but the incoming air may be hot enough to reduce the dryer's effective capacity. Placing it a bit downstream, or choosing a model with a higher inlet temperature rating, helps it hold its dew point.

What is the most common mistake at this scale?
Skipping the dryer entirely and relying on a tank drain or water trap alone. Those catch bulk water but do not lower the dew point, so moisture still reaches the tool as the air cools.

Does an air dryer reduce my system pressure?
Every dryer introduces some pressure drop, which matters more on a small system with limited headroom. Check the specification on the product page and factor it into your available pressure at the tool.

Shop 0 to 15 CFM Compressed Air Dryers at CompressorPros

CompressorPros carries compact refrigerated compressed air dryers rated for 0 to 15 CFM, sized for small shops, point-of-use drops, and single-tool setups on standard power. If your flow rate runs higher, compare 15 to 30 CFM and 30 to 60 CFM dryers, or browse the full Dryers and Compressed Air Treatment range. All orders ship free, direct from the manufacturer, and our team can help you size a unit or Quote a different option. For help finding the right dryer, Call 803-339-0445 or E-Mail Sales@CompressorPros.com

Shop by Category

Shop by Brand

Price

Shop by Brand

Compressed Air Dryers 0 - 15 CFM Capacity

Schulz ADS-10 - 10 CFM Refrigerated Air Dryer

COOL 15, 15 CFM Refrigerated Air Dryer - Non-Cycling - 95 degree F Max Inlet Temp

Chicago Pneumatic Model QRS 7510XL Desiccant Dryer System

Schulz ADS-15 UP 15 CFM Refrigerated Air Dryer

AlphaPure CDD-010 10 CFM Desiccant Air Dryer

KSI Ecotroc KTA-S14 - 14 CFM Refrigerated Air Dryer

Schulz Air Compressors

sku: ADS 10

Schulz ADS-10 - 10 CFM Refrigerated Air Dryer

COOL Refrigerated Air Dryers

sku: 4102003584

COOL 15, 15 CFM Refrigerated Air Dryer - Non-Cycling - 95 degree F Max Inlet Temp

Chicago Pneumatic Air Compressors

sku: 8940161797