Rotary Screw Air Compressors

Rotary screw air compressors provide continuous-duty compressed air for shops, manufacturing facilities, and job sites that demand steady, high-volume output. CompressorPros carries fixed speed and variable speed models from 3 HP single phase units to 100+ HP three phase industrial systems, along with portable engine-driven options. Free Standard Shipping.

Compare Selected

What Are Rotary Screw Air Compressors?

A rotary screw air compressor uses two rotors that spin together to compress air continuously. This design delivers 100% duty cycle operation, meaning the unit can run nonstop without overheating or excessive wear. Rotary screw compressors are the standard for auto body shops, manufacturing plants, food processing facilities, and any operation where multiple tools or processes require compressed air all of the time.

Fixed Speed vs. Variable Speed Drive (VSD)

The most important decision when choosing a rotary screw compressor is whether to go with a fixed speed or variable speed drive.

Fixed Speed Rotary Screw Compressors

A fixed speed unit runs at a constant motor speed whenever it is operating. When air demand drops, the unit either continues running unloaded (consuming energy without producing air) or cycles off and back on when the demand picks back up. Fixed speed models cost less upfront and are well-suited to operations with consistent, predictable air demand. The Quincy QGS 15 TMD-3 15 HP Rotary Screw Air Compressor w/ Dryer is a popular fixed speed choice for mid-size shops.

Variable Speed Drive (VSD) Rotary Screw Compressors

A VSD rotary screw compressor adjusts motor speed to match real-time air demand. When demand drops, the motor slows down rather than running unloaded, reducing energy consumption by 20-35% in operations with fluctuating needs. VSD units carry a higher purchase price but often pay for themselves through energy savings within a few years. They are particularly effective for facilities that alternate between light assembly work and heavy grinding or sandblasting.

Types of Rotary Screw Air Compressors

Single Phase Rotary Screw Compressors

Single phase rotary screw compressors run on standard 230V single phase power, making them accessible to smaller shops and facilities without three phase electrical service. They typically range from 3 to 7.5 HP (Some 10 HP as well) and are a strong choice for body shops, woodworking studios, and small fabrication operations that need continuous air without the cost of an electrical upgrade.

Three Phase Rotary Screw Compressors

Three phase rotary screw models are the standard for commercial and industrial installations. Available from 5 HP to well over 100 HP, because of the larger HP range, three phase units can deliver higher CFM output. The Elgi EG37-150 50 HP Base Mount Rotary Screw Air Compressor represents the kind of industrial-grade capacity available in this range.

Quiet Rotary Screw Compressors

Quiet rotary screw compressors feature sound-dampening enclosures that bring noise levels down to 60-70 dBA, comparable to a normal conversation. These are ideal for installations near work areas, offices, or noise-sensitive environments where a compressor room is not feasible.

Portable Rotary Screw Compressors

Portable rotary screw compressors are engine-driven units mounted on trailers or skids for use at construction sites, pipeline work, and remote locations without electrical power. The ConX SC70 Compact 70 CFM Engine Driven Rotary Screw Air Compressor is a compact, lighter weight, but powerful air compressor that fits in most SUV's and trucks.

Mounting Configuration

Tank Mount Rotary Screw Compressors

Tank mount units integrate the compressor, motor, and air receiver tank into a single package, simplifying installation. Tank mount models are common in the 3 to 15 HP range and are well-suited to shops with limited floor space. The Elgi EN05-150-60T 7.5 HP Single Phase Rotary Screw 60 Gallon Tank Mount is a compact example of this configuration.

Base Mount Rotary Screw Compressors

Base mount compressors ship without a built-in tank, allowing the facility to pair the unit with an appropriately sized remote air receiver. This configuration is standard for larger installations where a centralized tank or piping system already exists.

Key Specifications

CFM (Cubic Feet per Minute): Total air volume delivered at rated pressure. Add up the CFM requirements of all tools and processes running simultaneously, then add a 20-30% buffer for leaks and future expansion.
HP (Horsepower): Ranges from 3 HP for small shop units to 200+ HP for industrial systems. VSD units can match a larger fixed speed unit's effective output at potentially lower energy cost.
Max PSI (Pounds per Square Inch): Most rotary screw compressors deliver 125 to 150 PSI. Verify that the unit meets the pressure requirement of your highest-demand application.
Voltage and Phase: Single phase (230V) for units up to about 7.5 HP (Some 10 HP); three phase (208/230/460V) for everything above. Confirm your facility's electrical service before purchasing.
Noise Level (dBA): Enclosed rotary screw units typically operate between 60 and 76 dBA. If the compressor will be installed near work areas, noise level becomes a critical selection factor.
Duty Cycle: All rotary screw compressors are rated for 100% duty cycle, meaning continuous operation. This is their primary advantage over reciprocating compressors, which are typically rated at 50-70%.

Brands Carried

Quincy: QGS and QGDV series covering fixed speed and VSD models from 5 to 30 HP, widely used in auto and industrial shops.
Elgi: EN and EG series from 7.5 to 75+ HP, known for energy efficiency and extended maintenance intervals across both fixed and variable speed lines.
Chicago Pneumatic: QRS series offering tank mount and base mount configurations from 3 to 30 HP with optional integrated dryers.
ConX: Portable, engine-driven rotary screw compressors from 70 to 185+ CFM for construction and field applications.
FS Curtis: Ultrapack series providing compact, enclosed rotary screw units for space-constrained installations.
Schulz: SRP Flex series with variable speed models from 15 to 125 HP for industrial facilities.

And Many More.

CompressorPros orders directly from the manufacturer and then it is shipped right to you, which saves time and potential damage due to handling freight multiple times.

FAQ

What size rotary screw compressor do I need? Add up the CFM demand of every tool and process that runs simultaneously at your facility, then select a compressor rated at least 20-30% above that total. This buffer accounts for line losses, leaks, and future growth.

Is a rotary screw compressor worth the higher cost over a piston compressor? For operations that require continuous air throughout the workday, yes. The 100% duty cycle, lower noise, and reduced maintenance costs typically offset the higher purchase price within a few years, especially in shops running multiple air tools at once.

What is the most common mistake when buying a rotary screw compressor? Overlooking electrical requirements. Many rotary screw compressors above 7.5 HP require three phase power, which not all facilities have. Confirm your voltage and phase availability before ordering.

How often does a rotary screw compressor need maintenance? Most manufacturers recommend oil and filter changes every 2,000-4,000 hours, with air/oil separator replacement at 4,000-8,000 hours. Rotary screw units generally require less frequent maintenance than reciprocating compressors of equivalent output.

Do rotary screw compressors need an air dryer? In most applications, yes. Compressed air contains moisture that can damage tools, contaminate coatings, and corrode piping. Many models in this category are available with an integrated refrigerated dryer, such as the Quincy QGS 5 TMD-1 5 HP Single Phase Rotary Screw with Dryer.

Does CompressorPros offer free shipping on rotary screw compressors? Yes. All orders ship free, direct from the manufacturer, on everything we sell. Standard shipping would be to a commercial address with a forklift on site. Liftgate delivery is available at an additional cost.

Shop Rotary Screw Air Compressors at CompressorPros

CompressorPros carries a full range of rotary screw air compressors, from compact single phase tank mount units to high-capacity three phase industrial systems, variable speed drive models, quiet enclosed units, and portable engine-driven compressors for field work. All orders ship free, direct from the manufacturer.

If you need help sizing a rotary screw compressor for your facility or want a quote on a multi-unit installation, reach out by phone (803-339-0445) or through e-mail (info@compressorpros.com).

Shop by Category

Shop by Brand

Shop by Brand

Chicago Pneumatic QRS 7.5 TM-3 7.5 HP 3 Phase Rotary Screw

Chicago Pneumatic QRSM 20 TM-3 20 HP Rotary 125 psi

Chicago Pneumatic QRSM 20 TM-3 20 HP Rotary Screw Compressor

Elgi EG11-125 15HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 125 psi

Elgi EG15-100 20HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 100 psi

Elgi EG15-125 20HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 125 psi

Elgi EG15-150 20HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 150 psi

Elgi EG18-100 25HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 100 psi

Elgi EG18-125 25HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 125 psi

Elgi EG22-100 30HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 100 psi

Elgi EG22-125 30HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 125 psi

Elgi EG22-150 30HP 208/230/460 Volt Three Phase Base Mount Rotary Screw Air Compressor - 150 psi